Can not add a Physical port into LAG

Can not add a Physical port into LAG

enter image description here

Using SuperMicro network module, which related to Intel SDN product,
the command PDF . and the Web GUI manual.

there I have qe57, qe61, qe65, qe69 four upstream ports, I want to aggregate them to one logical port.

so thanks for TeunVink and Zac67 I know use the channel-group command can put them into one port-channel.

now, my circumstances is, the qe57 is connected to converge Switch, the other qe ports do not, such as qe61, and so on.

my problem is, I can add qe61, qe65, qe69 into LAG. but I can not add the qe57:

with the error:

192.168.200.1 (config-if qe57)#channel-group 3800 aggregation multiple
Error! Param1

the difference between them. if add the qe57 into the channel-group, I think there all will be LAGMembers. there still is Physical at now.

enter image description here


EDIT-01

This is the different between qe57 and qe61 configuration:

192.168.200.1 (config-if qe57)#show running-config | begin qe57

      interface qe57

       no ip igmp snooping
       no ip igmp snooping router-port
       description "qe57"
       shutdown
       speed 40000
       no cut-through
       max-frame-size 1524
       no mac-address-table learning-mode
       flowcontrol send off
       flowcontrol receive off
       no switchport discard
       no switchport ingress-filtering
       no switchport pvid
       no switchport pvpt
       mac-mode normal
       no switchport dot1qtunnel
       spanning-tree cost 500
       no spanning-tree edge-port
       spanning-tree edge-port auto
       no spanning-tree enable
       spanning-tree mac
       no spanning-tree mcheck
       spanning-tree point-to-point-mac force
       spanning-tree priority 8
       no spanning-tree bpduguard enable
       no spanning-tree portfast
       no spanning-tree rootguard
       dcb admin enable
       dcb tx pfc
       dcb tx ets-conf
       no dcb tx ets-reco
       dcb tx app
       dcb tx cn
       no dcb pfc willing
       no dcb pfc priority
       no dcb pfc mbc
       no dcb ets willing
       no dcb ets cbs
       dcb ets max-tcs 0
       no dcb ets-conf bandwidth
       no dcb ets-conf algorithm
       no dcb ets-conf pri-assigment
       no dcb ets-reco bandwidth
       no dcb ets-reco algorithm
       no dcb ets-reco pri-assigment
       no dcb app willing
       dcb cn cnpv-supported 0,0,0,0,0,0,0,0
       dcb cn cnpv-ready 0,0,0,0,0,0,0,0
       no mls qos trust
       no mls qos map cos-bandwidth
       priority-queue
       no mls qos map dot1p-cos
       ovs port add spp0
       no lldp transmit
       no lldp receive
       lldp tlv-select management-address
       lldp tlv-select port-description
       lldp tlv-select system-capabilities
       lldp tlv-select system-description
       lldp tlv-select system-name
       lldp management-address ipv4 "169.254.1.1" system-port-number 57 "1.3.6.1.4.1.731.3.2.30.1.1.7"

      exit

      interface qe61

       description "qe61"
       shutdown
       speed 40000
       no cut-through
       max-frame-size 1524
       no mac-address-table learning-mode
       flowcontrol send off
       flowcontrol receive off
       no switchport discard
       no switchport ingress-filtering
       no switchport pvid
       no switchport pvpt
       mac-mode normal
       channel-group 3800 mode passive
       channel-group 3800 aggregation multiple
       channel-group 3800 timeout long
       channel-group 3800 key 3800
       channel-group 3800 lacp port-priority 128
       no channel-group 3800 collecting
       no channel-group 3800 defaulting
       no channel-group 3800 distributing
       no channel-group 3800 expired
       no channel-group 3800 synchronization
       channel-group 3800 partner key 0
       channel-group 3800 partner number 1
       channel-group 3800 partner priority 32768
       channel-group 3800 partner system 00:00:00:00:00:00
       channel-group 3800 partner system priority 8
       dcb admin enable
       dcb tx pfc
       dcb tx ets-conf
       no dcb tx ets-reco
       dcb tx app
       dcb tx cn
       no dcb pfc willing
       no dcb pfc priority
       no dcb pfc mbc
       no dcb ets willing
       no dcb ets cbs
       dcb ets max-tcs 0
       no dcb ets-conf bandwidth
       no dcb ets-conf algorithm
       no dcb ets-conf pri-assigment
       no dcb ets-reco bandwidth
       no dcb ets-reco algorithm
       no dcb ets-reco pri-assigment
       no dcb app willing
       dcb cn cnpv-supported 0,0,0,0,0,0,0,0
       dcb cn cnpv-ready 0,0,0,0,0,0,0,0
       no mls qos trust
       no mls qos map cos-bandwidth
       priority-queue
       no mls qos map dot1p-cos
       lldp transmit
       lldp receive
       lldp tlv-select management-address
       lldp tlv-select port-description
       lldp tlv-select system-capabilities
       lldp tlv-select system-description
       lldp tlv-select system-name
       lldp management-address ipv4 "169.254.1.1" system-port-number 61 "1.3.6.1.4.1.731.3.2.30.1.1.7"

      exit

who can tell me where is the issue?

Leave a Reply

Your email address will not be published. Required fields are marked *